Known Issues:

The ICE Development Team has addressed several issues with the software to improve its usability and user confidence. Please note the following:

  • Known issues to be posted...

Catalog Updates

Add On Catalogs
Gunlocke, HON, Kimball, People, Global, National, Trendway, and Experience Catalogs

License Agreement:

ICE Software STANDARD LICENSE:

This license applies to all versions including beta version of ICE®, including but not limited to the products ICEBox™, ICEsheet™, ICEsculptor™, ICE3d™, ICECad®, ICErender® , ICEvision®or ICEberg® which have been legally acquired and paid for from Ice Edge Business Solutions Ltd. (“ICE EDGE”), and for which all payments are current and up to date.

YOUR AGREEMENT TO THIS LICENSE
This License ("License") applies to all versions of the ICE®including but not limited to ICEBox™, ICEsheet™, ICEsculptor™, ICE3d™, ICECad®, ICErender®, ICEvision® or ICEberg® ("ICE") and its accompanying files, data and materials. Carefully read the following terms and conditions before using or installing ICE. Unless you have a different license agreement to use ICE signed by ICE EDGE your use or installation of ICE indicates your acceptance of this agreement. If you do not agree to all of the terms and conditions of this License, then do not use or install any copy of ICE. You also agree, at ICE EDGE's request, to remove any and all copies of ICE from all systems. ICE EDGE will not be required to provide notice or reasons for such a request.

OWNERSHIP
ICE is confidential. ICE is protected by the United States and Canadian copyright laws and other applicable laws and treaties. You acknowledge that the copyrights, patent rights, trade secrets, trademarks and other intellectual property in and to ICE are the exclusive property of ICE EDGE. Notwithstanding anything in this License to the contrary, ICE EDGE retains title, the copyright, and all intellectual property rights in and to ICE and all copies of ICE. No right, title or interest in or to any copyright, trademark, service mark, logo or trade name, or other intellectual property of ICE EDGE is granted under this License.

SCOPE OF LICENSE
Subject to the terms and conditions of this License, ICE EDGE grants you a non-exclusive, non-transferable, limited license either for use of a single copy of ICE by a single person who uses ICE personally on one or more computers, or for installation of a single copy of ICE on a single workstation used non-simultaneously by multiple people, but not both. This is not a concurrent use license. All rights of any kind in ICE which are not expressly granted in this License are entirely and exclusively reserved to and by ICE EDGE. You may use and install ICE solely as expressly provided in this License.

PRIVACY
ICE EDGE may collect and use Non-Personally Identifiable Information or data for any purpose. ICE EDGE may collect and use Personally Identifiable Information or data for purposes pertaining to customer service or for efforts in improving the ICE software products or services. ICE EDGE will not reveal Personally Identifiable Information about you to unaffiliated third parties, unless: (1) you request or authorize it; (2) the information is provided to help complete a transaction for you; (3) the information is provided to comply with the law or applicable regulations, to enforce this License Agreement or other agreements, or to protect our rights, property or safety or the rights, property or safety of our users or others.

RESTRICTIONS
You may not copy or reproduce ICE, except as expressly authorized herein. You may make copies of ICE only as reasonably necessary for authorized installation of ICE pursuant to this License and for archival back-up purposes. You must faithfully reproduce all trademark, copyright and proprietary notices included on such authorized copies. You may not distribute, rent, lease, loan, sublicense ICE, act as a service bureau nor permit anyone else to do so. Unless enforcement is prohibited by applicable law, you may not modify, translate, decompile, disassemble, reverse engineer, or created derivative works based on ICE, nor permit anyone else to do so. ICE is only licensed to you in the form of machine executable or readable code. This License does not entitle you to any source code or confidential information.

WARRANTY DISCLAIMERS AND LIABILITY LIMITATIONS
ICE, AND ANY AND ALL ACCOMPANYING SOFTWARE, FILES, DATA AND MATERIALS, ARE DISTRIBUTED AND PROVIDED "AS IS" AND WITH NO WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ICE EDGE DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF, ICE. ICE EDGE DOES NOT WARRANT THAT THE OPERATION OF ICE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT THE USE OF ANY PASSWORDS AND/OR ENCRYPTION FEATURES WILL BE EFFECTIVE IN PREVENTING THE UNINTENTIONAL DISCLOSURE OF INFORMATION CONTAINED IN ANY FILE. You acknowledge that good data processing procedure dictates that any program, including ICE, must be thoroughly tested with non-critical data before there is any reliance on it, and you hereby assume the entire risk of all use of the copies of ICE covered by this License. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE.

ICE EDGE SHALL NOT BE LIABLE FOR ANY DAMAGE OR FINANCIAL LOSS ARISING OUT OF THE USE OF, OR INABILITY TO USE, ICE. THE AGGREGATE LIABILITY OF ICE EDGE ARISING OUT OF OR PERTAINING TO THIS LICENSE OR TO ICE, REGARDLESS OF THE FORM OF ACTION OR CLAIM, IS LIMITED EXCLUSIVELY TO REFUND OF ANY LICENSE FEE PAID TO ICE EDGE UNDER THIS LICENSE. IN NO EVENT SHALL ICE EDGE, OR ITS PRINCIPALS, SHAREHOLDERS, OFFICERS, EMPLOYEES, AFFILIATES, CONTRACTORS, OR SUBSIDIARIES, BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES WHATSOEVER RELATING TO THE USE OF ICE, (INCLUDING, WITHOUT LIMITATION, LOSS OR DISCLOSURE OF DATA OR INFORMATION, LOSS OF PROFIT, REVENUE, BUSINESS OPPORTUNITY OR BUSINESS ADVANTAGE, OR BUSINESS INTERRUPTION), EVEN IF THEY HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER BASED UPON A CLAIM OR ACTION OF CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, INDEMNITY, OR ANY OTHER LEGAL CAUSE OF ACTION. YOUR SOLE AND EXCLUSIVE REMEDY AND ICE EDGE'S SOLE AND EXCLUSIVE LIABILITY ARE SET FORTH IN THIS LICENSE. THIS LICENSE DEFINES AND REPRESENTS A MUTUALLY AGREED-UPON ALLOCATION OF RISK BETWEEN THE PARTIES AND THE CONSIDERATION GIVEN AND RECEIVED UNDER THIS LICENSE HAS BEEN ADJUSTED TO REFLECT SUCH ALLOCATION OF RISK.

IN ADDITION, IN NO EVENT DOES ICE EDGE AUTHORIZE YOU OR ANYONE ELSE TO USE ICE IN APPLICATIONS OR SYSTEMS WHERE ICE'S FAILURE TO PERFORM CAN REASONABLY BE EXPECTED TO RESULT IN A SIGNIFICANT LOSS OF PROPERTY. ANY SUCH USE IS ENTIRELY AT YOUR OWN RISK, AND YOU AGREE TO HOLD ICE EDGE HARMLESS FROM ANY AND ALL CLAIMS OR LOSSES RELATING TO SUCH.

BREACH
You acknowledge that any breach by you of this License will give rise to irreparable injury to ICE EDGE, inadequately compensable in damages alone. Accordingly, ICE EDGE may seek and obtain preliminary and permanent injunctive relief against the breach or threatened breach of this License. Such relief shall be in addition to any other legal or equitable remedies which may be available to ICE EDGE. In the event of any litigation or arbitration between the parties relating to this License, the prevailing party shall be entitled to recover from the other party all reasonable attorneys' fees and other reasonable costs incurred by the prevailing party in connection therewith and in pursuing and collecting remedies (including appeals), relief, and damages.

TERMINATION
ICE EDGE may terminate this License for any reason and at any time by giving you thirty (30) days advance written notice of termination. Upon termination, you agree to immediately remove, delete, destroy, and erase all copies of ICE from all computers, drives, and storage media where it may be found.

GENERAL
This License is the complete statement of the agreement between the parties on the subject matter, and supersedes all other or prior understandings, agreements, and arrangements. This License shall be governed by the laws of the Province of Alberta. Exclusive jurisdiction and venue for all matters relating to this License shall be in courts located in the Province of Alberta, and you consent to such jurisdiction and venue. There are no third-party beneficiaries of any promises, obligations, or representations made by ICE EDGE herein. Any waiver by ICE EDGE of any violation of this License by you shall not constitute, nor contribute to, a waiver by ICE EDGE of any other or future violation by you of the same provision, or any other provision, of this License. If any part of this License is for any reason held invalid or unenforceable, it shall be deemed severable, and the validity of the remainder of this License, or the applications of such provision shall not be affected. You may not assign this License without the advance written consent of ICE EDGE

Install Instructions:

  1. Close ICE.
  2. If you haven't yet install the full version, please do so!
  3. Download Catalog Updates and Install


I AGREE. I have read the license agreement to download the ICE software


Click the download button below to begin downloading...

You are about to download the file:
GUN May Update

This update requires March Update for GUN. Check for previous downloads below or contact us at icesupport@ice-edge.com.

Estimated Size: 64.7MB



Click the download button below to begin downloading...

You are about to download the file:
HON April 2012 Update

This update requires that you install February 2012 Update for HON. Check for previous downloads below or contact us at icesupport@ice-edge.com.

Estimated Size: 561.1MB



Click the download button below to begin downloading...

You are about to download the file:
KIM April Update

This update requires that you install March catalog or later. Check for previous downloads below or contact us at icesupport@ice-edge.com.

Estimated Size: 54.5MB



Click the download button below to begin downloading...

You are about to download the file:
People February Catalog

Estimated Size: 98.3MB



Click the download button below to begin downloading...

You are about to download the file:
Global February 2012 Update

This update requires that you install November 2011 catalog or later. Check for previous downloads below or contact us at icesupport@ice-edge.com

Estimated Size: 265.2MB



Click the download button below to begin downloading...

You are about to download the file:
Evolve December Update

This update requires that you install October catalog or later. Check for previous downloads below or contact us at icesupport@ice-edge.com

Estimated Size: 488.1MB



Click the download button below to begin downloading...

You are about to download the file:
National April Update

This update requires that you install March catalog or later. If you would like a set of discs, please contact us at icesupport@ice-edge.com

Estimated Size: 512.9MB



Trendway February

Please contact support if you would like to receive this catalog icesupport@ice-edge.com




Experience Catalogs

Click the download button below to begin downloading...

You are about to download the file:
COE Distributing March 2012 Update

Estimated Size: 225.6MB

This update requires that you install May 2011 catalog or later. If you don't already have the full version of this catalog, please contact us at icesupport@ice-edge.com



Click the download button below to begin downloading...

You are about to download the file:
ESI Dec 2011 Full

Estimated Size: 51.5MB



Click the download button below to begin downloading...

You are about to download the file:
Enwork June 2011 Full

Estimated Size: 575.3MB



Click the download button below to begin downloading...

You are about to download the file:
Maispace May 2011 Full

Estimated Size: 33.8MB



Click the download button below to begin downloading...

You are about to download the file:
Raynor February 2012 Full

Estimated Size: 377.4MB



Jofco March 2012

Please contact support if you would like to receive this catalog icesupport@ice-edge.com



Highmark Jan Catalog

If you would like a set of discs, please contact us at icesupport@ice-edge.com


Gunlocke Catalog Part Updates during the month of:

Click here to download March Update from February (49.5MB)
Click here to download February 2012 Update from December 2011 (75.5MB)
Click here to download December Update from September (153.6MB)
Click here to download September Update from June (143.2MB)
July 2011
June 2011
Click here to download June Update from May (75.2MB)
May 2011
Click here to download May Update from March (174.2MB)
March 2011
Click here to download March Update from February (24.5MB)
February 2011
Click here to download February Update from January (24.3MB)
January 2011
Click here to download January Update from August (48.5MB)

This update requires that you install August full catalog or later. If you have not received your discs for Gunlocke August Catalogs (or later). Please contact us at icesupport@ice-edge.com
November\December 2010
September\October 2010


HON Catalog Part Updates during the month of:

Click here to download February 2012 Update from January 2012 (122.1MB)
Click here to download January 2012 Update from December 2011 (157.3MB)
Click here to download December Update from November (141.6MB)
Click here to download November Update from October (122.1MB)
Click here to download October Update from September (85.3MB)
July 2011
Click here to download September Update from June (175.6MB)
June 2011 - No new catalog additions/removals
Click here to download June Update from May (80.4MB)
May 2011
Click here to download May Update from April (98.3MB)
April 2011
Click here to download April Update from March (109.6MB)
February\March 2011

If you have not received your discs for HON March Catalogs or later, Please contact us at icesupport@ice-edge.com


Kimball Catalog Part Updates during the month of:

Click here to download March Update from January (299.4MB)
Click here to download January 2012 Update from December 2011 (55.6MB)
Click here to download December Update from November (119.2MB)
Click here to download November Update from October (407.7MB)
Click here to download October Update from September (403.3MB)
Click here to download September Update from June (83.2MB)
June 2011
Click here to download June Update from May (70.5MB)
March/April/May 2011
Click here to download May Update from February (1.6GB)
February 2011 - No new catalog additions/removals
Click here to download February Update from January (108.1MB)
January 2011

If you have not received your discs for Kimball January Catalogs or later, Please contact us at icesupport@ice-edge.com
November/December 2010
October 2010


Global Catalog Part Updates during the month of:

Click here to download November Update from October (517.4MB)
Click here to download October Update from June (502.5MB)

If you have not received your discs for Global June Catalogs or later, Please contact us at icesupport@ice-edge.com


Evolve Catalog Part Updates during the month of:

Click here to download Evolve October Full (815.1MB)

Perfer to receive discs for Evolve October Catalogs or later, Please contact us at icesupport@ice-edge.com


National Catalog Part Updates during the month of:

Click here to download March Update from January (35.6MB)
Click here to download January 2012 Update from December 2011 (26.4MB)
Click here to download December Update from November (181.6MB)
Click here to download November Update from October (71.5MB)
Click here to download October Update from September (68.2MB)
Click here to download September Update from June (601.4MB)

This update requires that you install June full catalog or later. If you have not received your discs for National June Catalogs (or later). Please contact us at icesupport@ice-edge.com